polypropylene s 40 % dlouhých skleněných vláken (PP GF40 LFT)



We use this material in the following process(es):

Extrusion.
Extruded profiles and semifinished products

Injection moulding.
Injection moulded parts up to 16.000 g

Thermoplastic structure foaming (TSF).
Multi functional parts and housings up to 16 kg


Material number   1515  
Density ISO 1183 1,22 g/cm3
   

Mechanical properties

Tensile strength ISO 527 110 MPa
Elongation at break ISO 527 2 %
Tensile modulus ISO 527 9100 MPa
Standard for ball pressure hardness   H358/30  
Charpy notched impact strength at 23 °C ISO 179/1eA 16 KJ/m2
   

Electrical properties

Volume resistivity IEC 60093 1,00E+14 Ohm · m
Surface resistivity IEC 60093 1,00E+14 Ohm
   

Thermal properties

Thermal conductance DIN 52 612 0,28 W/K m
Linear thermal expansion along|cross to direction of flow ISO 11359 15/34 10-6/K
Melting point or glass transition temp. ISO 11357 165 °C
Heat distortion temperature A ISO 75 HDT/A (1.8 MPa) 152 °C
Short time use temperature   150 °C
Continuous use temperature   130 °C
Minimal use temperature   -30 °C
   

Other properties

Humidity absorption at 23°C/50% ISO 62 <0,1 %
Water absorption ISO 62 <0,1 %
Flammability UL 94 IEC 60695-11-10 HB -
Thickness for UL 94   1,5 mm
Transparency (opaque/translucent/clear)   opaque  
Raw material   Celstran PP-GF40-04 (Ticona)  
   
na: not applicable

This datasheet is a print-out of the material database RIWETA 4.0 and is intended for personal use only.

The figures in this datasheet are guide values. The values are affected by processing conditions, modifications, additives and environmental conditions and they do not release you from the obligation to check the validity and to undertake tests on your own. The information given is based on our state of knowledge. The material data is not to be construed as guaranteeing specific properties and the data can not be used to deduce the suitability for a particular application.

It remains the responsibility of the user of our products not to infringe patent rights and to comply with existing laws and regulations.

LPM s.r.o.
Technické díly z plastů
Koněvova 536
CZ-506 11 Jičín



© 2008 by LPM s.r.o., Technické díly z plastů
Koněvova 536, CZ-506 11 Jičín, Česka republika, info@lpm.cz